How to properly address Asbestos and Lead paint removal

Lead paints and asbestos removal Toronto, asbestos abatement, asbestos removal

Lead paints and asbestos removal are very dangerous if left unattended to. They can contaminate the air or water and cause serious health issues. This blogpost is meant to tell you the proper process of addressing Asbestos and Lead paint removal.

Asbestos removal

Asbestos a lot of times have been discovered to cause various health issues to humans. Leaving asbestos in bad conditions and unattended to can lead to health hazards like the asbestosis, malignant mesothelioma and asbestos-related lung cancer. Airborne asbestos has toxic fibres that are invisible to the human eye and can cause issues to people without them realizing either by inhaling, ingested via contaminated food or water, causing health-related issues at later times.

Asbestos use has reduced over time, but it has not completely been done away with. They can still be found in building supplies, automotive parts, ironing boards, protective clothing and so on.

If asbestos is as dangerous as this, how then can they be removed to keep the house safe from health issues that can be caused by asbestos? The best way to go about the asbestos removal process is to hire the help of professionals. Handling of asbestos products can be dangerous and a person who is not trained or certified is not recommended to remove asbestos and asbestos-containing materials. A professional will look at the state of the asbestos and recommended either complete asbestos removal, professionally know as asbestos abatement or encapsulation.

Encapsulation of asbestos or asbestos contained materials requires the coating of the material with a sealant that keeps the fibre from escaping into the air. Complete Removal, on the other hand, is more expensive than encapsulation. But it is highly effective as it completely eradicates the mineral from your property.

The normal asbestos removal process is:

  • Switching HVAC units off and sealing of vents to contain the asbestos fibres
  • Sealing off of the work area
  • Employing wet clean up methods using a HEPA filter vacuum.
  • Removal of all materials from site and storage of same in leak-tight containers.

Lead paint removal

The second thing we’ll look at in our Asbestos and lead paint removal is the removal process of lead paint. Lead paints can be as dangerous as asbestos if they are not properly managed. And the process is equally as complicated as that of asbestos removal. This means that if you notice any lead paint problem in your house, your best way to go is to call a restoration company for professional restoration service.

Like asbestos, most new homes are free from lead-based paints and other lead-based products. However, older homes, i.e. those built before the Environmental Protection Agency (EPA) enacted laws to enforce the building of lead-free homes in 2010, might still have lead paints.

The lead paint removal options that can be employed by a professional restoration service provider are:

Encapsulation: which usually is the cheapest and less complicated method where the professional applies a unique type of coating that is similar to your lead paint to create a watertight bond that keeps the lead paint sealed.

Enclosure: With this method, the professional will cover old surfaces with a new one. Like covering a windowsill with vinyl or aluminium or setting up new drywall.

Safety tips:

  • Clean up any loose asbestos or loose lead paints chips immediately.
  • Keep children as far away from the contaminated areas as possible.
  • Encourage regular washing of hands. Most especially before sleeping or eating.

So, if you notice any peel or loose lead paint, or asbestos removal, call a professional. Your asbestos and lead paint removal must be handled by a professional, because of how dangerous they are.